home *** CD-ROM | disk | FTP | other *** search
- Path: daily-planet.execpc.com!usenet
- From: jeffsj@execpc.com (Jeffery S. Jones)
- Newsgroups: comp.sys.amiga.datacomm
- Subject: Re: Staying Online/ppp problems
- Date: 31 Jan 1996 21:34:18 GMT
- Organization: Exec-PC BBS - Milwaukee, WI
- Message-ID: <1276.6604T935T1895@execpc.com>
- References: <4dlqnt$hgp@bud.shadow.net> <30FE7930.1B87@topcity.mn.org><4dpbjn$5te@homer.alpha.net><3105D7E2.2F52@vianet.net.au><1968.6599T148T777@vip.at><310A57BE.59B8@vianet.net.au><310B0DE5.7209@vianet.net.au>
- <1194.6602T920T2437@execpc.com> <2146.6604T664T475@xmission.com>
- NNTP-Posting-Host: albemuth.execpc.com
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
- On 31-Jan-96 11:04:09, John S. Burger <jsburger@xmission.com> wrote:
- >On or about 30-Jan-96 06:23:42 Jeffery S. Jones typed the following words
- >about "Re: Staying Online/ppp problems". My reply is thus...
-
-
- JSJ>> On 28-Jan-96 13:47:17, Geoff Taylor <carinehs@vianet.net.au> wrote:
- >>>Postscript
- >>>================================================
- >>>Geoff Taylor wrote:
- >>>> Ip address is dynamic and I connect at 34800.
- >>>> ================================================
- >>>That should be 38400
-
- JSJ>> The speed in the ppp.device config file must match the connect speed
- >of
- JSJ>> dialer -- it also must be 38400, not 57600.
- > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- >Huh? Why do you say that. I use it at 57600 everyday here.
-
- If you have already connected via the dialer program at 38400, you must set
- the ppp.device to the same speed.
-
- I use 57600, and use the ppp.device dialer, so I don't have to worry about
- mixing speeds. But if more than one program uses the serial port at the same
- time, they must all use the same speed.
-
-
- <tsb> *Starfire*
- *-___________________________________________________________________-*
- Jeff Jones email:jeffsj@execpc.com *//* Amiga Lives!
- *TFG*Starfire*Design*Studio* *\\//* 1985-1994, born again 1995!
- --
-
-